Use The Brush In The Correct Way To Prevent Hair Loss

Brush shedding: There are two situations: single bundle shedding and partial shedding. Single-bundle hair loss means that the firmness of the hair planting is not good. It is mainly related to the size of the drill hole, the hair-planting, the depth, and the number of hair roots. Generally, it can be detected by the tensile test of single-bundle hair. The local hair loss is actually mainly broken hair. It is related to the dynamic balance of the force of the brush roller, the quality of the brush wire, and the quality of the flocking (density, inclination, pressure injury, resin curing, etc.).

Inclination of filament planting: When pressing the U-shaped metal strip, special attention should be paid to whether the filament is smooth. If there is a cross tilt, the resistance of the reverse filament will increase when the brush roller is running, and the filament will be easily broken, which will greatly reduce the life of the brush.

Low filament density: In order to save the cost of using filaments, some brush manufacturers have fewer bristles per hole, or the brush hole density is not enough, resulting in sparse brush rollers, soft bristles surface, low grinding efficiency, and reduced bristles. the life of the brush.

When most people encounter this situation, they will think that the quality of the brush is not a problem. In fact, this view is wrong. A large number of bristles falling off is not necessarily a problem with the quality of the brush. It is very likely that people have not adopted accurate methods to use a brush.

The maintenance of the brush should start from the purchase. The brush must be protected by the packaging during the transportation process to avoid being infected by dust or other debris on the way. Care must be taken when packing, not to damage the brush. During use, in order to ensure that the filaments of the brush have a clean and upright feeling, it is necessary to prepare a cushion on the shaft head to avoid direct contact between the filaments and the dirty ground. Workers should not rush to open the package before unpacking or use. If the package is opened too early, it will be polluted by the dust floating in the nearby air, which will also have an adverse effect on work.

What Are The Causes And Solutions Of Brush Shedding？

There are two main reasons for the fall of the bristles. One reason is that there is a problem with the quality of the brush itself, and the bristles of the brush will fall off a lot after the user uses the brush for a long time. The other reason is that people do not use the brush in an accurate way. , causing the bristles to fall off in a large area.

Before using the brush, people soak the brush in warm water for a period of time. The time does not need to be too long, just a few minutes. The bristles soaked in warm water are very smooth. After soaking, take out the brush and remove the hair from the water. When brushing, brush the bristles with your hands a few times, you can remove all the bristles that are loose and about to fall off. Avoid a lot of bristles falling off when the brush is used in the future. In addition, the brush after use must be cleaned in time, and do not leave too much dirt on the brush wire. If necessary, for more stubborn stains, we can use a brush cleaner to remove the dirt and put it after cleaning. Go to a dry and ventilated place to dry naturally. Remember not to expose to the sun, which will only help the brush to age and lose hair.

Since we cannot avoid the damage to the staple set brush, we can prolong the service life of the brush in an effective way, that is to say, reduce the shedding of the brush under the condition of ensuring the quality of work.